Email:Jason@nbtn.com.cn Ningbo Longtu Network Technology Co.,Ltd

Ningbo Longtu Network Technology Co.,Ltd

Product Categories
Contact Us

Ningbo Longtu Network Technology Co.,Ltd

Add:No.1 Xiaotuanpu East Road, Guanhaiwei East Industry Zone, Cixi, Ningbo, China 315314

Con:Liubing Gui

Pho:86-15924360466

Tel:86-574-58583514

E-mail:Jason@nbtn.com.cn

Network Cabinet Configuration Specifications

Network equipment on the server cabinet depth, height, load and other aspects of the installation requirements are. Network cabinet height generally 2.2 meters, 2.0 meters, 1.8 meters, 1.6 meters, 1.4 meters, 1.2 meters, 1 meter seven height; width of 800mm, 600mm two; depth of 600mm, 800mm and 900mm, 1000mm four, such as There are different specifications that need to be customized.

  Most of the common accessories need to buy separately: special fixed tray, dedicated sliding tray, power bracket, to the caster, to the foot nail, cable management, cable management, L bracket, extension beams and so on. The main frame, front and rear doors, left and right side doors can be quickly disassembled.

  High-density hole Ventilation tray for the installation of various equipment, the size of a wide range of uses, there are 19 "standard tray, non-standard fixed tray, etc. Conventional fixed tray depth of 600mm, 800mm, 1000mm and other specifications. Fixed tray load is not less than 50KG.

  Slide baffle: Optional for installation of the keyboard and other equipment, can be easily pulled out and pushed back; 19 "standard sliding tray for any 19" standard cabinet. Conventional configuration of the sliding tray depth of 600mm, 800mm two specifications. Sliding tray load is not less than 20KG.

  PDU power distribution unit: Optional power socket, suitable for any standard power plug, with 19 "mounting bracket, flexible and diverse installation. Specifications: 6 socket and 8 parameters: ~ 220V, 10A

  Cable frame: 19 "standard cable management frame. Can be used with any kind of network cabinet .12 hole cable frame with 12, 24, 48 patch panel use the best results.

  Management line: dedicated to the use of the cabinet line device, installation and removal is very convenient, the use of the number and location can be adjusted.

  L bracket: L bracket can be used with the cabinet for the installation of the cabinet 19 "standard equipment, especially the larger 19" standard equipment, such as rack-mounted servers and so on.

  Blind plate: Blind plate used to block 19 "standard cabinet spare position and other purposes, there are 1U, 2U, 3U, 4U and other specifications. Conventional blind plate for the 1U, 2U two.

  Extended beam: A device dedicated to the use of cabinets for expansion of the installation space in the cabinet. Installation and removal is very convenient. At the same time can also be equipped with cable management, power distribution unit installation. Form flexible and diverse.

  Mounting nuts: for the installation of all equipment in the network cabinet, including the installation of most of the accessories of the cabinet.

  Keyboard tray: used to install the standard computer keyboard, with the market all the specifications of the computer keyboard; can be folded 90 degrees. The keyboard tray must be used with the sliding tray.

  Fan unit: installed in the top of the cabinet, according to the ambient temperature and equipment to adjust the fan speed, effectively reducing the noise of the engine room.

  Rackmount fan unit: height 1U, can be installed in the 19 "standard cabinet at any height position, according to the network cabinet heat source as appropriate configuration.


Copyright © Ningbo Longtu Network Technology Co.,Ltd. All Rights Reserved.
QR Code