1. Avoid light
Direct sunlight is very helpful to increase the temperature of the server, but unfortunately, the higher the temperature of the server, the more prone to problems, which is very detrimental to the stability of the server system. In addition, direct sunlight is very detrimental to the monitor in the computer room. Due to direct sunlight, the life of the monitor is easily halved, so it is very important to avoid light.
In some small computer rooms, due to the relatively small space, the facilities in the room will be more crowded, and there may be a large window not far away; for those who desire freedom but must sit inside for a long time, the computer room The environment inside is very boring, and curtains and windows can be opened at any time to feel sunlight and fresh air at the same time, but it will cause some damage to the equipment and also form a potential danger.
Therefore, in the room where the sunlight reaches the server room through the window, it is best to add a rule, do not open the curtains and windows, but considering the feeling of the computer room staff, it is best to leave a few hours a day for the staff to take turns outdoors Walk.
2. Dustproof
The server is a high-performance machine, but also a very fragile body. Some computer room servers, because they are exposed to the air for a long time, when the dust in the air mixes into a certain amount, the fan in the machine will be submerged and start to strike; in addition, the entry of dust will affect most of the equipment in the host, Including the life of the motherboard and CPU caused a great loss.
Therefore, in the computer room, in this case, it is best to buy a professional server cabinet; before the worker enters the computer room, it is best to wear a disposable dust cover or personal cleaning slippers on his feet; in principle , The computer room does not allow outsiders to visit.
3. Pressure control
The pressure of each server has certain limits, not to mention the all-metal body, but there is always a maximum pressure. Tower servers are generally vertically independent main bodies. Even if they are stacked horizontally, the number of stacked servers will not be too much due to too much space occupied by a single machine. In this case, the pressure on the external environment is not great. Therefore, when setting the specifications of the cabinet, we must do a good job of budgeting, and don't put too many parts on the first floor.
4. Space control
The space control of the server is mainly for convenient planning and management. In order to achieve better heat dissipation, the temperature control mentioned above also has a small reason. The server's messy layout or network lines are displayed everywhere, as well as scattered cabinets and lines under the floor. Through careful maintenance work, the position of the machine lines can be re-planned, and the control of the lines is also very sequential, so it is easier deal with.