1.When installing the 12U wall-mounted network Cabinet, you should pay attention to it. You must leave the power supply line. When installing, you can make a sample comparison with the opening for installation. When installing, you should follow the drawing.
2.When installing the related equipment switch of the 12U wall-mounted network Cabinet, the screws should not be too tight, otherwise the switch will tilt and not be too loose, so that the switch will not be stable during operation, the device will shake when working.
3.When installing the distribution frame in the 12U wall-mounted network Cabinet, pay attention to the unified line sequence. When wiring, pay attention to the connection tool and the distribution frame perpendicular, pay attention to the position of each twisted pair, and there is no intersection between each line. At the same time, the distribution frame should be installed in the left and right corresponding holes, the horizontal error is not more than 2mm, let alone the left and right holes are not allowed to be installed. Installation should be carried out in accordance with the standard. The equipment installation type is convenient for future use, so no errors can occur, otherwise it will be delayed.
