1. Line sorting:
Group the network cables. The number of groups is usually less than or equal to the number of cable racks behind the cabinet. Tie the power lines of all equipment together, insert the plug from the rear wire hole, and find their respective equipment through a separate wire rack.
2. Fixed equipment:
Adjust the baffle in the cabinet to a proper position, so that the administrator can see the operation of all equipment without opening the cabinet door, and add baffle appropriately according to the number and size of equipment. Pay attention to leave a certain gap between the baffles. All switching devices used in the cabinet will be. Routing equipment shall be placed according to the drawings drawn in advance.
3. Network cable labeling:
After all network cables are connected, it is necessary to identify each network cable, paste the prepared label on the network cable immediately, and mark it with a pen (generally indicating the room number or purpose). The identification is required to be simple and easy to understand. Cross network cables can be distinguished by instant pasting with different colors. If there are too many equipment, the equipment shall be classified, numbered and marked.
