Network Cabinet in the wiring, tie is a skill, from the rear of the cabinet after the line. Order the line, do not twist. Line should be fixed and strong, do not sag, loose. The cable ties should be as symmetrical as possible on both sides. All kinds of wire joints should be left a certain margin, do not plug in the interface too tight. Do not block the equipment as much as possible.
The PDU (power module) of the cabinet is installed as far as possible in the side panel of the network cabinet, and is neatly arranged as far as possible. Do not expose it to the rear side of the cabinet.
The network cabinet has a good technical performance, the structure of the cabinet should be based on mechanical properties and electrical use of the environment requirements, chemical design and physical design, with good structure of the strength and stiffness and has good electromagnetic isolation, noise, grounding and ventilation The Network cabinet with anti-corrosion anti-corrosion impact, dust, water, radiation performance, to ensure stable and reliable safety of the cabinet work.
Network cabinet with good practicality and safety protection, easy to operate, install, repair and to ensure the safety of operators. Network cabinet In order to facilitate the production, assembly, commissioning and transportation, network cabinet must meet the standardization, standardization, serialization requirements, network cabinet out of the cabinet is more beautiful, more practical, more coordinated color.